Our Products >> Sensors >> Hall Effect Sensors
HOS-20AP Hall Effect Sensor
The HOS-AP series of PCB mounted, open loop, Hall Effect current sensors are designed for applications requiring the measurement of DC current and DC current pulses.
Features:
- Contact-less, non-intrusive current sensing.
- DC current, DC pulse and AC current measurements.
| Model | Rated Current (RMS) (Ampere) |
Measurement Range (Ampere) |
|---|---|---|
| HOS-5AP | 5A | 0 to ± 7.5A |
| HOS-10AP | 10A | 0 to ± 15.0A |
| HOS-15AP | 15A | 0 to ± 22.5A |
| HOS-20AB | 20A | 0 to ± 30.0A |
| HOS-25AP | 25A | 0 to ± 37.5A |
Performance:
- Accuracy: ± 1% Nominal Current
- Linearity: ≤ 1%
- Response Time: ≤ 10µSecond
- Offset Voltage (@ +25°C): ± 30mV maximum for primary current In = 0.
- Temperature Drift: ± 1mV/ °C maximum (-10 °C to +70 °C)
Specifications:
- Frequency: 0 to 20kHz.
- Dielectric withstand voltage between Primary and Secondary: 2,500V RMS @ 50HZ for 1 minute.
- Load resistance: > 10 kOhms .
- Operating Temperature: -10ºC to +70ºC.
- Storage Temperature: -15ºC to +90ºC.
- Supply Voltage: ±12V … 15V (± 5%).
- Supply Consumption: 25mA.
- Construction:
- Epoxy encapsulated housing.
- Case material – Nylon, UL flame retardant rating 94 V-0.
- RoHS Compliant
Physical Specifications:
| Connection Definitions | |||
|---|---|---|---|
| Pin#1 | Power supply input +15VDC | ||
| Pin#2 | Power supply input -15VDC | ||
| Pin#3 | Signal output (positive or negative value dependent upon direction of primary current | ||
| Pin#4 | Signal output ground/ return | ||
| Pin#5 | Primary Input | ||
| Pin#6 | Primary Input | ||
Download HOS-AP Brochure (pdf 278kb)
Hall Effect sensors can be designed and manufactured to meet the specific application requirements. For a no obligation technical evaluation, please provide the specific performance requirements to Engineering @ TIChenAssociates.